Difficulty

Moderate

Steps

5

Time Required

                          15 - 30 minutes

Sections

1

  • Volume Dial
  • 5 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackSony ICF-C1T

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

The volume dial gauges the volume produced by the Sony ICF-C1T by rolling the dial-up and down. If your system does not change the volume upon moving the dial, the dial may need to be replaced.

Step 3-5 requires separating part of the device, make sure to use caution handling circuitry to ensure that no wires are torn.

Before beginning this guide, make sure to unplug the device and remove any batteries.

What you need

Step 1

              Volume Dial
  • Remove the 4 (14mm) screws from the underside of the device using the Philips #0 Screwdriver.
  • Before beginning this step, make sure the clock is unplugged and the batteries have been removed.

Remove the 4 (14mm) screws from the underside of the device using the Philips #0 Screwdriver.

Before beginning this step, make sure the clock is unplugged and the batteries have been removed.

1024

Step 2

  • Pry apart the edge of the top and side portions of the device using a flat-headed tool (i.e. flathead screwdriver, card, etc)
  • It is recommended to use the iFixit Opening Tools for optimal removal.

Pry apart the edge of the top and side portions of the device using a flat-headed tool (i.e. flathead screwdriver, card, etc)

It is recommended to use the iFixit Opening Tools for optimal removal.

Step 3

  • Carefully separate the device by gently pulling up on the top of the clock/radio.
  • Use caution when pulling the top of the clock; the clock display is located directly behind the faceplate and still connected by multiple wires.

Carefully separate the device by gently pulling up on the top of the clock/radio.

Use caution when pulling the top of the clock; the clock display is located directly behind the faceplate and still connected by multiple wires.

Step 4

  • To remove the motherboard, gently pull apart the sides of the device.
  • Do not pull hard on the motherboard, as it is still connected by multiple wires inside the device.
  • Be careful of sharp pieces.
  • It would be helpful, although not necessary, to have someone helping out with this step.

To remove the motherboard, gently pull apart the sides of the device.

Do not pull hard on the motherboard, as it is still connected by multiple wires inside the device.

Be careful of sharp pieces.

It would be helpful, although not necessary, to have someone helping out with this step.

Step 5

  • Remove the volume dial by pulling it off the motherboard. This can take a little force to remove.

Remove the volume dial by pulling it off the motherboard. This can take a little force to remove.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors 


                    amber woolery

Member since: 01/30/2015

307 Reputation

                                      2 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges

Team

                       University of Kentucky Louisville, Team 1-5, Rountree Winter 2015                        

                                                  Member of University of Kentucky Louisville, Team 1-5, Rountree Winter 2015 



                    LOUISVILLE-ROUNTREE-W15S1G5                     


                                            3 Members                     


                                            5 Guides authored

J Kwan - Dec 23, 2017

Reply