Difficulty

Moderate

Steps

5

Time Required

                          15 - 30 minutes

Sections

1

  • Tuner Dial
  • 5 steps

Flags

4

Grammar Police

Embrace your inner English teacher and help improve this guide’s grammar!

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackSony ICF-C1T

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Tuner Dial
  • Using the Phillips 00 screwdriver, remove 4 (14mm) screws from the underside of the device.
  • Make sure that the clock is unplugged and the battery is removed before tampering with device to avoid electrical shock.

Using the Phillips 00 screwdriver, remove 4 (14mm) screws from the underside of the device.

Make sure that the clock is unplugged and the battery is removed before tampering with device to avoid electrical shock.

1024

Step 2

  • Use opening tool to pry apart edges of the top and side portions of the device.

Use opening tool to pry apart edges of the top and side portions of the device.

Step 3

  • Carefully separate device by gently pulling up on the top portion.
  • Be sure to use caution when pulling device apart as the clock display is located close to the front face plate and connected by multiple wires.

Carefully separate device by gently pulling up on the top portion.

Be sure to use caution when pulling device apart as the clock display is located close to the front face plate and connected by multiple wires.

Step 4

  • To remove the motherboard, gently pull apart the sides of the device.
  • Do not pull hard on motherboard, as it is still connected by multiple wires inside the device.
  • Be careful of sharp pieces on the motherboard.
  • It would be helpful, although not necessary, to have someone helping out with this step.

To remove the motherboard, gently pull apart the sides of the device.

Do not pull hard on motherboard, as it is still connected by multiple wires inside the device.

Be careful of sharp pieces on the motherboard.

It would be helpful, although not necessary, to have someone helping out with this step.

Step 5

  • Remove tuner dial by pulling it off of motherboard. This can take a little force to remove.

Remove tuner dial by pulling it off of motherboard. This can take a little force to remove.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Megan

Member since: 01/30/2015

275 Reputation

                                      2 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       University of Kentucky Louisville, Team 1-5, Rountree Winter 2015                        

                                                  Member of University of Kentucky Louisville, Team 1-5, Rountree Winter 2015 



                    LOUISVILLE-ROUNTREE-W15S1G5                     


                                            3 Members                     


                                            5 Guides authored