Sony Handycam Hdr Xr500V Door Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          20 minutes

Sections

Door
10 steps

Flags

BackSony Handycam HDR-XR500V
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Opening LCD screen

Pull on tab away from the camera by applying pressure with index finger.

Pull on tab away from the camera by applying pressure with index finger.

1024

Step 2

Next, remove the three 3 screws shown with the red markers.

Next, remove the three 3 screws shown with the red markers.

Step 3

Place the camera on a flat service, so that the strap is downward and the lens is facing you.
First, lift up the connector.
Then pull it back.
Remove the connector from the device.

Place the camera on a flat service, so that the strap is downward and the lens is facing you.

First, lift up the connector.

Then pull it back.

Remove the connector from the device.

Step 4

Position the camera so that the screen tab is pointing towards you.
Twist the tab clockwise one notch.
Remove the single screw.

Position the camera so that the screen tab is pointing towards you.

Twist the tab clockwise one notch.

Remove the single screw.

Step 5

Remove the two screws on the control board.

Remove the two screws on the control board.

Step 6

Place the camera so that the lens is facing downward and the battery compartment is facing towards you.
Remove the single screw.

Place the camera so that the lens is facing downward and the battery compartment is facing towards you.

Step 7

Lay the device on its side so it is resting on the strap and the bottom of the camera is facing you.
Remove the five screws.

Lay the device on its side so it is resting on the strap and the bottom of the camera is facing you.

Remove the five screws.

Step 8

Close the LCD screen door.
Turn the camera to the eye piece and battery compartment is facing you.

Close the LCD screen door.

Turn the camera to the eye piece and battery compartment is facing you.

Step 9

Pull the entire cabinet panel away from camera.

Pull the entire cabinet panel away from camera.

Step 10

You have disassembled the cabinet door and got to the speakers.
Do not try to pry off the entire door, it can remain slightly attached.

You have disassembled the cabinet door and got to the speakers.

Do not try to pry off the entire door, it can remain slightly attached.

Your door will now be disassembled in order to replace parts inside and these steps in reverse order will also help you put the door back together

Cancel: I did not complete this guide.

Author

                                      with 8 other contributors

                    Amber Han

Member since: 09/09/2014

113 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       CSU Fullerton, Team 2-5, Bruce Fall 2014                        

                                                  Member of CSU Fullerton, Team 2-5, Bruce Fall 2014 



                    CSUF-BRUCE-F14S2G5                     


                                            4 Members                     


                                            2 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team