Difficulty
Easy
Steps
12
Time Required
10 - 20 minutes
Sections
3
- Camera Shell
- 7 steps
- Lens Cover Panel
- 2 steps
- Shutter Assembly
- 3 steps
Flags
1
Needs More Images
A few more images would make this guide’s procedures crystal clear.
BackSony Handycam HDR-CX675
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Camera Shell
- The battery should be removed and oriented upwards.
The battery should be removed and oriented upwards.
1024
Step 2
- Remove the side 4.5 mm JIS #00 screw using JIS Screwdriver
- Remove the 5.5 mm JIS #00 screw.
Remove the side 4.5 mm JIS #00 screw using JIS Screwdriver
Remove the 5.5 mm JIS #00 screw.
Step 3
- Gently pry the plastic case surrounding the start/stop button free by using the blue plastic opening tools.
- Remove the casing using your thumb and index finger.
Gently pry the plastic case surrounding the start/stop button free by using the blue plastic opening tools.
Remove the casing using your thumb and index finger.
Step 4
- Turn the camera around and flip open the LCD screen to expose the side panel.
- Remove the 5.5mm #00 screw using the J00 head screwdriver.
Turn the camera around and flip open the LCD screen to expose the side panel.
Remove the 5.5mm #00 screw using the J00 head screwdriver.
Step 5
- Turn the camera to the handgrip side and unscrew two of the 5.5mm JIS #00 head screws using the JIS #00 head screwdriver.
Turn the camera to the handgrip side and unscrew two of the 5.5mm JIS #00 head screws using the JIS #00 head screwdriver.
Step 6
- Remove the two 5.5mm JIS #00 screws with the bottom of the camera facing up.
Remove the two 5.5mm JIS #00 screws with the bottom of the camera facing up.
Step 7
- Turn the camera around in a way that the bottom of the camera is facing you.
- Use the blue opening tool to gently remove the camera shell off of the camera.
Turn the camera around in a way that the bottom of the camera is facing you.
Use the blue opening tool to gently remove the camera shell off of the camera.
Step 8
Lens Cover Panel
- Using the blue plastic opener smoothly to take the camera shell off.
Using the blue plastic opener smoothly to take the camera shell off.
Step 9
- Let the lens of the camera be pointed to your left.
- Keep holding the camera with your right hand then gently remove the lens cover panel with your left hand.
Let the lens of the camera be pointed to your left.
Keep holding the camera with your right hand then gently remove the lens cover panel with your left hand.
Step 10
Shutter Assembly
- Place the camera on its lens and keep the LCD screen open and pointed to your right.
- Remove the 5.5mm JIS #00 screws from the hinge of the camera.
Place the camera on its lens and keep the LCD screen open and pointed to your right.
Remove the 5.5mm JIS #00 screws from the hinge of the camera.
Step 11
- Hold the camera with your left hand, and gently remove the shutter assembly part.
Hold the camera with your left hand, and gently remove the shutter assembly part.
Step 12
- Hold the camera that the bottom is upwards and lens pointed to your left hand.
- By the metal tweezers, remove the white wire that is connecting the shutter assembly and motherboard
Hold the camera that the bottom is upwards and lens pointed to your left hand.
By the metal tweezers, remove the white wire that is connecting the shutter assembly and motherboard
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Mohamed Nazer
Member since: 02/15/2017
373 Reputation
3 Guides authored
Badges:
11
+8 more badges
Team
USF Tampa, Team 8-2, Eyestone Spring 2017
Member of USF Tampa, Team 8-2, Eyestone Spring 2017
USFT-EYESTONE-S17S8G2
3 Members
8 Guides authored
