Difficulty

Moderate

Steps

8

Time Required

                          35 - 45 minutes

Sections

3

  • Battery
  • 2 steps
  • Camera’s Body
  • 3 steps
  • Lens
  • 3 steps

Flags

0

  • BackSony Handycam HDR­-CX220

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Push in the battery indicator.

Push in the battery indicator.

1024

Step 2

  • Slide the battery out of the slot.
  • To put the battery back in, line up the battery’s metal part with the camera’s and slide it in.

Slide the battery out of the slot.

To put the battery back in, line up the battery’s metal part with the camera’s and slide it in.

Step 3

              Camera's Body
  • Use the Phillips #0 screwdriver to remove the two 5mm screws.
  • Use the Phillips #0 screwdriver to remove the two 5mm screws.
  • Use the Phillips #0 screwdriver to remove the three 5mm screws.

Use the Phillips #0 screwdriver to remove the two 5mm screws.

Use the Phillips #0 screwdriver to remove the three 5mm screws.

Step 4

  • Use the plastic opening tool to loosen the plastic case of the camcorder.

Use the plastic opening tool to loosen the plastic case of the camcorder.

Step 5

  • Use your hands to remove the plastic case.
  • Gently pull on the case not to damage anything internally.

Use your hands to remove the plastic case.

Gently pull on the case not to damage anything internally.

Step 6

              Lens
  • Use the Phillips #0 Screwdriver to remove the 5mm screw
  • Use the Phillips #0 Screwdriver to remove the 5mm screw
  • Use the Plastic Opening tools to unhook the highlighted area.

Use the Phillips #0 Screwdriver to remove the 5mm screw

Use the Plastic Opening tools to unhook the highlighted area.

Step 7

  • Remove the 3 (4mm) screws on the front of the lens using the Philips #0 Screwdriver.

Remove the 3 (4mm) screws on the front of the lens using the Philips #0 Screwdriver.

Step 8

  • Remove the lens and clean it if needed.

Remove the lens and clean it if needed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors 


                    Keven

Member since: 03/11/2016

811 Reputation

                                      6 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       UMass Dartmouth, Team 8-5, Botvin Spring 2016                        

                                                  Member of UMass Dartmouth, Team 8-5, Botvin Spring 2016 



                    UMASSD-BOTVIN-S16S8G5                     


                                            3 Members                     


                                            12 Guides authored