Difficulty
Moderate
Steps
9
Time Required
30 - 40 minutes
Sections
3
- Battery
- 2 steps
- Camera’s Body
- 3 steps
- Display Screen
- 4 steps
Flags
0
BackSony Handycam HDR-CX220
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Push in the battery indicator.
Push in the battery indicator.
1024
Step 2
- Slide the battery out of the slot.
- To put the battery back in, line up the battery’s metal part with the camera’s and slide it in.
Slide the battery out of the slot.
To put the battery back in, line up the battery’s metal part with the camera’s and slide it in.
Step 3
Camera's Body
- Use the Phillips #0 screwdriver to remove the two 5mm screws.
- Use the Phillips #0 screwdriver to remove the two 5mm screws.
- Use the Phillips #0 screwdriver to remove the three 5mm screws.
Use the Phillips #0 screwdriver to remove the two 5mm screws.
Use the Phillips #0 screwdriver to remove the three 5mm screws.
Step 4
- Use the plastic opening tool to loosen the plastic case of the camcorder.
Use the plastic opening tool to loosen the plastic case of the camcorder.
Step 5
- Use your hands to remove the plastic case.
- Gently pull on the case not to damage anything internally.
Use your hands to remove the plastic case.
Gently pull on the case not to damage anything internally.
Step 6
Display Screen
- Use the Phillips #0 screwdriver to remover the two (5mm) screws on the outer part and one (3mm) in the middle.
- In the second image, there is a second screw on the opposite side of the screen hinge. This screw is not shown, but must also be removed.
Use the Phillips #0 screwdriver to remover the two (5mm) screws on the outer part and one (3mm) in the middle.
In the second image, there is a second screw on the opposite side of the screen hinge. This screw is not shown, but must also be removed.
Step 7
- Use the plastic opening tool to remove the plastic case protecting the screen
- Pull it gently not to damage anything under the case
Use the plastic opening tool to remove the plastic case protecting the screen
Pull it gently not to damage anything under the case
Step 8
- Use the Phillips #0 screwdriver to remove the 2 screws shown
- Use your hands to carefully unhook the screen from the highlighted hook
Use the Phillips #0 screwdriver to remove the 2 screws shown
Use your hands to carefully unhook the screen from the highlighted hook
Step 9
- Use your hands to carefully remove the tape
- After removing the tape, pull on the wire disconnecting it from the screen.
Use your hands to carefully remove the tape
After removing the tape, pull on the wire disconnecting it from the screen.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 3 other contributors
Keven
Member since: 03/11/2016
811 Reputation
6 Guides authored
Badges:
11
+8 more badges
Team
UMass Dartmouth, Team 8-5, Botvin Spring 2016
Member of UMass Dartmouth, Team 8-5, Botvin Spring 2016
UMASSD-BOTVIN-S16S8G5
3 Members
12 Guides authored
Rafael Oliveira - Jun 30, 2017
Reply
How do you mount hdr cx220 lcd cable flat? can you help me?
ANM WORLD - Dec 21, 2020
Reply
gjhgvnvyh n hygfv
We have a camera 220. Whose dipstick display strip has deteriorated again. Where can I find this strip? Video is good information so that’s why