Difficulty

Easy

Steps

9

Time Required

                          15 - 30 minutes

Sections

2

  • Battery
  • 2 steps
  • Outer Cover
  • 7 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackSony Handycam DCR-DVD103

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Battery
  • Images do not show the camera’s battery.
  • On the back of the camera beneath the viewfinder, locate the battery pack.
  • Press the small button.
  • Slide the switch forward.

Images do not show the camera’s battery.

On the back of the camera beneath the viewfinder, locate the battery pack.

Press the small button.

Slide the switch forward.

1024

Step 2

  • Remove the battery from the camera.
  • To reinsert the battery, slide the battery into the camera.

Remove the battery from the camera.

To reinsert the battery, slide the battery into the camera.

Step 3

              Outer Cover
  • Using a #00 Phillips screwdriver, remove the six 4.5 mm screws from the camera’s bottom.

Using a #00 Phillips screwdriver, remove the six 4.5 mm screws from the camera’s bottom.

Step 4

  • Remove the three 4.5 mm screws beneath the battery.
  • Remove the 2.9 mm screw from the right corner.
  • Remove the two 4.5 mm screws from the battery’s right wall.
  • Images do not show the battery.

Remove the three 4.5 mm screws beneath the battery.

Remove the 2.9 mm screw from the right corner.

Remove the two 4.5 mm screws from the battery’s right wall.

Images do not show the battery.

Step 5

  • Remove the 4.5 mm screw under the output flap on the front of the camera below the lens.

Remove the 4.5 mm screw under the output flap on the front of the camera below the lens.

Step 6

  • Remove the two 4.5 mm screws at the top of the camera.
  • Remove the 4.5 mm screw from the disk side of the camera (next to the lens).

Remove the two 4.5 mm screws at the top of the camera.

Remove the 4.5 mm screw from the disk side of the camera (next to the lens).

Step 7

  • Extend the gray viewfinder, then gently remove the black plastic casing.
  • Caution: Plastic pieces are fragile.

Extend the gray viewfinder, then gently remove the black plastic casing.

Caution: Plastic pieces are fragile.

Step 8

  • Remove the two 2.9 mm screws under the black plastic casing.

Remove the two 2.9 mm screws under the black plastic casing.

Step 9

  • Gently pull apart the outer silver case and screen.
  • Remove the copper wire strip to detach the case from the camera.

Gently pull apart the outer silver case and screen.

Remove the copper wire strip to detach the case from the camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 8 other contributors 


                    kaitlin

Member since: 01/11/2011

336 Reputation

                                      3 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Cal Poly, Team 7-44, Regan Winter 2011                        

                                                  Member of Cal Poly, Team 7-44, Regan Winter 2011 



                    CPSU-REGAN-W11S7G44                     


                                            5 Members                     


                                            10 Guides authored