Sony Handycam Cx260V Battery Port Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          5 minutes

Sections

Sony Handycam CX260V Housing Disassembly
16 steps
Battery Port
1 step

Flags

Inconsistent Images

Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

Better Introduction

Improve this guide by completing or revising its introduction.

BackSony Handycam CX260V
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Sony Handycam CX260V Housing Disassembly

Use a Phillips #00 screwdriver to remove the one 3mm and two 5mm screws located in the battery assembly area.

Use a Phillips #00 screwdriver to remove the one 3mm and two 5mm screws located in the battery assembly area.

1024

Step 2

Remove the two 5mm screws located on the top left and bottom of the camera.
Remove the 3mm screw located in the middle of the joint attaching the LCD screen to the device.

Remove the two 5mm screws located on the top left and bottom of the camera.

Remove the 3mm screw located in the middle of the joint attaching the LCD screen to the device.

Step 3

Remove the two 5mm screws from the panel to the right of the LCD screen.

Remove the two 5mm screws from the panel to the right of the LCD screen.

Step 4

Use the plastic opening tool to remove the cover for the recording buttons.

Use the plastic opening tool to remove the cover for the recording buttons.

Step 5

Remove the five 5mm screws located on the bottom panel.
Remove the bottom panel covering the internal motherboard.

Remove the five 5mm screws located on the bottom panel.

Remove the bottom panel covering the internal motherboard.

Step 6

Remove the 5mm screw located by the lens and two 5mm screws located under the handle.
Remove the leather strap from the device.

Remove the 5mm screw located by the lens and two 5mm screws located under the handle.

Remove the leather strap from the device.

Step 7

Remove the 5mm screw to the left of the Record button.
Remove the entire right-side panel where the leather strap was located.

Remove the 5mm screw to the left of the Record button.

Remove the entire right-side panel where the leather strap was located.

Step 8

Use a spudger to remove the LCD joint cover.

Use a spudger to remove the LCD joint cover.

Step 9

Remove the three black 5mm screws and one silver 4mm screw located on the front right-side of the camera, near the orange motherboard.
The silver screw is located on the front right-side of the camera and is attached to the main panel.

Remove the three black 5mm screws and one silver 4mm screw located on the front right-side of the camera, near the orange motherboard.

The silver screw is located on the front right-side of the camera and is attached to the main panel.

Step 10

Remove the 5mm screw located on the top left near the camera lens.

Remove the 5mm screw located on the top left near the camera lens.

Step 11

Using tweezers, carefully detach the two wires connected to the bottom motherboard portion of the camera.
One white wire, one black wire, and one flat yellow wire are connected to the lens panel.
Remove the lens panel.

Using tweezers, carefully detach the two wires connected to the bottom motherboard portion of the camera.

One white wire, one black wire, and one flat yellow wire are connected to the lens panel.

Remove the lens panel.

Step 12

Remove the three 5mm screws.
One is located at the bottom of the lens area, and the other two are on the top left and right of the lens area.
Carefully remove the camera lens with your hands or a spudger.
There are three springs located underneath the lens. Make sure to not lose them.

Remove the three 5mm screws.

One is located at the bottom of the lens area, and the other two are on the top left and right of the lens area.

Carefully remove the camera lens with your hands or a spudger.

There are three springs located underneath the lens. Make sure to not lose them.

Step 13

Remove one 5mm screw located on the back left section near the zoom and picture control capturing button.
There are two flat blue wires keeping the buttons connected to the main assembly. Carefully set them aside or unplug them.
This partially removes the zoom and picture capturing control.

Remove one 5mm screw located on the back left section near the zoom and picture control capturing button.

There are two flat blue wires keeping the buttons connected to the main assembly. Carefully set them aside or unplug them.

This partially removes the zoom and picture capturing control.

Step 14

Remove one silver 5mm screw located near the tripod mount.
Remove the tripod mount screw that has the mount assembly underneath.

Remove one silver 5mm screw located near the tripod mount.

Remove the tripod mount screw that has the mount assembly underneath.

Step 15

Remove the silver 5mm screw located on the front right side of the camera by the orange motherboard.
Unplug the wire.
Remove the silver 5mm screw underneath the wire.

Remove the silver 5mm screw located on the front right side of the camera by the orange motherboard.

Unplug the wire.

Remove the silver 5mm screw underneath the wire.

Step 16

Using tweezers, release the clip attaching the main internal system to the mainframe. This allows the rest of the camera to be freely taken apart.
The side panel will have cords running through the frame. If you unplug these, the frame will be removable.

Using tweezers, release the clip attaching the main internal system to the mainframe. This allows the rest of the camera to be freely taken apart.

The side panel will have cords running through the frame. If you unplug these, the frame will be removable.

Step 17

              Battery Port

Unplug the battery port connected to the frame/motherboard. Remove the battery port.

Unplug the battery port connected to the frame/motherboard. Remove the battery port.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 4 other contributors

                    Alejandro Barajas

Member since: 04/07/2015

502 Reputation

                                      3 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Eastern Washington University, Team 1-5, Plummer Spring 2015                        

                                                  Member of Eastern Washington University, Team 1-5, Plummer Spring 2015 



                    EWU-PLUMMER-S15S1G5                     


                                            4 Members                     


                                            12 Guides authored

Inconsistent Images#

Markup Mishap#

Better Introduction#

Introduction#

What you need#

Team#