Difficulty

Easy

Steps

2

Time Required

                          3 minutes

Sections

1

  • Left Ear Pad
  • 2 steps

Flags

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackSony H.ear on 3

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Step 1

              Extend the Left Speaker
  • Extend the Left cup and fold the Right cup away via the headband.
  • This will help protect the other ear pad while you work on this one.

Extend the Left cup and fold the Right cup away via the headband.

This will help protect the other ear pad while you work on this one.

1024

Step 2

              Unclip the Left Ear Pad
  • The pad is attached by 6 clips in a hexagonal pattern, shown by the arrows.
  • Starting from the top, insert an opening pick in between where the cup leather meets the plastic casing, push it in firmly, then twist it until you disengage the top clip.
  • Try not to damage or peel off the leather while doing this. It helps if you pry towards the speaker housing, not the leather cup.
  • Work round the back side, poking the pick in and twisting to disengage further clips until you can gently pull the cup away.
  • When re-assembling, make sure that the stitching line on the ear pad is facing the bottom.

The pad is attached by 6 clips in a hexagonal pattern, shown by the arrows.

Starting from the top, insert an opening pick in between where the cup leather meets the plastic casing, push it in firmly, then twist it until you disengage the top clip.

Try not to damage or peel off the leather while doing this. It helps if you pry towards the speaker housing, not the leather cup.

Work round the back side, poking the pick in and twisting to disengage further clips until you can gently pull the cup away.

When re-assembling, make sure that the stitching line on the ear pad is facing the bottom.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Dzuk

Member since: 07/12/2021

1,221 Reputation

                                      10 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges