Difficulty
Moderate
Steps
4
Time Required
5 - 10 minutes
Sections
2
- Front Phone Cover
- 1 step
- Front Dark Grey Case
- 3 steps
Flags
0
BackSony Ericsson z300
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Front Phone Cover
- To remove the front cover, lift up the case with a fingernail in the small slot as shown.
To remove the front cover, lift up the case with a fingernail in the small slot as shown.
1024
Step 2
Front Dark Grey Case
- To remove the front grey case, remove the two screws shown with a T5 Torx Screwdriver.
To remove the front grey case, remove the two screws shown with a T5 Torx Screwdriver.
Step 3
- Pry up the dark grey case with your fingernail until all four snaps around the top are loose.
Pry up the dark grey case with your fingernail until all four snaps around the top are loose.
Step 4
- Lift up towards the bottom and slide the case off.
Lift up towards the bottom and slide the case off.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 5 other contributors
Alex Serventi
Member since: 10/07/2010
65 Reputation
13 Guides authored
Badges:
10
+7 more badges
Team
Cal Poly, Team 5-15, Maness Fall 2010
Member of Cal Poly, Team 5-15, Maness Fall 2010
CPSU-MANESS-F10S5G15
4 Members
26 Guides authored