Sony Ericsson Xperia X10 Camera Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          15 minutes            

Sections

1

• Camera
• 8 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackSony Ericsson Xperia X10

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Camera               

• To access the internal components, such as the camera, we need to flip the phone with the screen facing down. Once this is done remove the battery.

To access the internal components, such as the camera, we need to flip the phone with the screen facing down. Once this is done remove the battery.

1024

Step 2

• Remove eight 5mm screws as shown in the image. Use a T-6 bit.

Remove eight 5mm screws as shown in the image. Use a T-6 bit.

Step 3

• Using a case opener, start on the bottom right side of the phone and undo clips located at the interior sides. Repeat this step for the left side.

Using a case opener, start on the bottom right side of the phone and undo clips located at the interior sides. Repeat this step for the left side.

Step 4

• Once the clips are undone the back casing should dislocate and reveal the internal components of the phone. Camera location is identified on the image.

Once the clips are undone the back casing should dislocate and reveal the internal components of the phone. Camera location is identified on the image.

Step 5

• To remove the internal case surrounding the camera, apply pressure on the left side of internal casing and using a flat head screw driver unlatch both clips on the right side of casing. Once lifted detach ribbon cable with flat head screwdriver.

To remove the internal case surrounding the camera, apply pressure on the left side of internal casing and using a flat head screw driver unlatch both clips on the right side of casing. Once lifted detach ribbon cable with flat head screwdriver.

Step 6

• Once the interior casing is removed, dislocate the hardware by unlatching clip at shown location.

Once the interior casing is removed, dislocate the hardware by unlatching clip at shown location.

Step 7

• To remove damaged camera flip hardware so the lens of the camera is facing downwards and remove ribbon cable connecting camera to hardware.

To remove damaged camera flip hardware so the lens of the camera is facing downwards and remove ribbon cable connecting camera to hardware.

Step 8

• Once camera is removed, insert new functional camera part and reassemble

Once camera is removed, insert new functional camera part and reassemble

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Bryan                     

Member since: 11/03/2013

410 Reputation

                                      3 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges