Difficulty
Easy
Steps
6
Time Required
10 minutes
Sections
1
- Audio Jack
- 6 steps
Flags
2
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackSony Ericsson Xperia X10
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Audio Jack
- The audio jack is located on the top side of the phone, in the center. To access the audio jack disassemble is necessary.
The audio jack is located on the top side of the phone, in the center. To access the audio jack disassemble is necessary.
1024
Step 2
- Start by having the screen of the phone facing downwards and remove the battery. Remove eight 5mm screws located as shown with a T-6 bit.
Start by having the screen of the phone facing downwards and remove the battery. Remove eight 5mm screws located as shown with a T-6 bit.
Step 3
- Using a case opener, start on the bottom right side of the phone and undo clips located at the interior sides. Repeat this step for the left side.
Using a case opener, start on the bottom right side of the phone and undo clips located at the interior sides. Repeat this step for the left side.
Step 4
- Once the clips are undone the back casing should dislocate and reveal the internal components of the phone. Audio jack location is identified on the image.
Once the clips are undone the back casing should dislocate and reveal the internal components of the phone. Audio jack location is identified on the image.
Step 5
- The audio jack can only be accessed if the internal casing is removed. To remove this, apply pressure on the left side of internal casing and using a flat head screw driver unlatch both clips on the right side of casing.
The audio jack can only be accessed if the internal casing is removed. To remove this, apply pressure on the left side of internal casing and using a flat head screw driver unlatch both clips on the right side of casing.
Step 6
- Audio Jack is located and easily removed. New component can be inserted.
Audio Jack is located and easily removed. New component can be inserted.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Bryan
Member since: 11/03/2013
410 Reputation
3 Guides authored
Badges:
6
+3 more badges