Difficulty

Moderate

Steps

6

Time Required

                          15 - 30 minutes            

Sections

2

  • Battery
  • 2 steps
  • Logic Board
  • 4 steps

Flags

0

  • BackSony Ericsson Xperia Pro MK16A

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Taking the Back Off               
  • Use a plastic opening tool to get the back cover off your phone.
  • The plastic opener will work on any side, but be careful and pry gently.

Use a plastic opening tool to get the back cover off your phone.

The plastic opener will work on any side, but be careful and pry gently.

1024

Step 2

              Removing the Battery               
  • Locate the battery in your phone.
  • Find the divot below the battery.
  • Use your thumb to lift the battery out of the phone.

Locate the battery in your phone.

Find the divot below the battery.

Use your thumb to lift the battery out of the phone.

Step 3

              Remove Screws               
  • Remove the 4 black screws with the Phillips screwdriver.
  • Remove the 4 silver screws with the Torx screwdriver.

Remove the 4 black screws with the Phillips screwdriver.

Remove the 4 silver screws with the Torx screwdriver.

Step 4

              Remove Back Case               
  • Insert the plastic opening tool in between the two halves of the case. Pry around the phone to detach the back case.

Insert the plastic opening tool in between the two halves of the case. Pry around the phone to detach the back case.

Step 5

              Access the Logic Board               
  • Remove the last screw that is connecting the logic board using the Phillips screwdriver.
  • Undo the two ribbons.

Remove the last screw that is connecting the logic board using the Phillips screwdriver.

Undo the two ribbons.

Step 6

              Remove the Logic Board               
  • Undo that last connector.

Undo that last connector.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Craig                     

Member since: 10/21/2014

55 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       UMass Dartmouth, Team 6-5, Vijaybhaskar Fall 2014                        

                                                  Member of UMass Dartmouth, Team 6-5, Vijaybhaskar Fall 2014 



                    UMASSD-VIJAYBHASKAR-F14S6G5                     


                                            3 Members                     


                                            4 Guides authored