Difficulty
Moderate
Steps
10
Time Required
10 minutes
Sections
3
- Battery
- 3 steps
- Headphone Jack
- 2 steps
- Camera
- 5 steps
Flags
0
BackSony Ericsson Xperia Active
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Remove the back cover.
- Open the flaps and remove the back cover using the plastic opening device.
Open the flaps and remove the back cover using the plastic opening device.
1024
Step 2
Remove inside plastic battery cover.
- Remove the battery shield with the plastic opening device.
Remove the battery shield with the plastic opening device.
Step 3
Remove the battery
- Remove the battery.
Remove the battery.
Step 4
Unfastening The Motherboard Cover
- Unscrew the 5mm screws with the T5 head.
- Unscrew the 6mm screw with the T6 head.
Unscrew the 5mm screws with the T5 head.
Unscrew the 6mm screw with the T6 head.
Step 5
Removing The Motherboard Cover
- Remove the black cover with the plastic opening tool.
- Remove the headphone jack from its slot.
Remove the black cover with the plastic opening tool.
Remove the headphone jack from its slot.
Step 6
Unplug the back motherboard plug.
- Unplug the plug from the motherboard.
Unplug the plug from the motherboard.
Step 7
Remove motherboard from device case.
- Using the plastic opening tool, carefully pry up on the edges of the motherboard, opposite of the jacks.
Using the plastic opening tool, carefully pry up on the edges of the motherboard, opposite of the jacks.
Step 8
Remove the display ribbon cable
- Carefully pry up on the tab holding down the display ribbon cable and remove the ribbon cable.
Carefully pry up on the tab holding down the display ribbon cable and remove the ribbon cable.
Step 9
- Use the plastic opening tool to pry the ribbon cable away from the motherboard.
Use the plastic opening tool to pry the ribbon cable away from the motherboard.
Step 10
Remove camera from device
- Pull the camera out through the front of the motherboard.
Pull the camera out through the front of the motherboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Alex Tobin
Member since: 10/06/2014
406 Reputation
3 Guides authored
Badges:
7
+4 more badges
Team
USF Tampa, Team 14-5, Leahy Fall 2014
Member of USF Tampa, Team 14-5, Leahy Fall 2014
USFT-LEAHY-F14S14G5
3 Members
5 Guides authored