Difficulty

Easy

Steps

6

Time Required

                          10 - 15 minutes

Sections

2

  • Battery
  • 3 steps
  • Keypad and Front Cover
  • 3 steps

Flags

1

Inconsistent Images

Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.

  • BackSONY Ericsson W890i

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Flick the two lock tabs into the unlocked positions by pushing each button forward.

Flick the two lock tabs into the unlocked positions by pushing each button forward.

1024

Step 2

  • Pop the back cover up using the groove on the top of the phone.

Pop the back cover up using the groove on the top of the phone.

Step 3

  • You can now access the phone’s battery.
  • Using a spudger, remove the battery and set it aside.

You can now access the phone’s battery.

Using a spudger, remove the battery and set it aside.

Step 4

              Keypad and Front Cover
  • Remove the two small rubber pieces that cover the lower screws.
  • Using a T-6 Torx wrench or screwdriver, remove all four of the small screws at the top and bottom corners on the back of the phones.

Remove the two small rubber pieces that cover the lower screws.

Using a T-6 Torx wrench or screwdriver, remove all four of the small screws at the top and bottom corners on the back of the phones.

Step 5

  • Gently pry off the faceplate using a plastic opening tool.
  • Insert the plastic opening tool into the middle of the front and back panels of the phone.

Gently pry off the faceplate using a plastic opening tool.

Insert the plastic opening tool into the middle of the front and back panels of the phone.

Step 6

  • Separate the front and back panels that were pryed open with the plastic opening tool.

Separate the front and back panels that were pryed open with the plastic opening tool.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors 


                    Bob

Member since: 04/15/2013

316 Reputation

                                      3 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       SUNY Cortland, Team 1-3, Getto Spring 2013                        

                                                  Member of SUNY Cortland, Team 1-3, Getto Spring 2013 



                    SUNYCORT-GETTO-S13S1G3                     


                                            3 Members                     


                                            8 Guides authored