Sony Ericsson W810I Case Replacement Repair Guide

Difficulty

Easy

Steps

7

Time Required

                          10 minutes            

Sections

2

• Battery
• 3 steps
• Case
• 4 steps

Flags

0

• BackSony Ericsson W810i

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Battery               

• Place your Sony Ericsson W810I screen side down with the battery cover facing up as shown.

Place your Sony Ericsson W810I screen side down with the battery cover facing up as shown.

1024

Step 2

• Remove the battery cover by applying downward pressure on the Singular Symbol and then shifting the pressure towards the bottom edge of the phone.

Remove the battery cover by applying downward pressure on the Singular Symbol and then shifting the pressure towards the bottom edge of the phone.

Step 3

• Lift the bottom of the battery away from the phone with your thumb and rotate until the opening in the bottom of the case is oriented downward. The battery should slide out.

Lift the bottom of the battery away from the phone with your thumb and rotate until the opening in the bottom of the case is oriented downward. The battery should slide out.

Step 4

              Case               

• Remove the two 3.9mm screws with a Phillips size #00 screwdriver.
• Remove the two 6.35mm screws with a Torx T6 screwdriver.

Remove the two 3.9mm screws with a Phillips size #00 screwdriver.

Remove the two 6.35mm screws with a Torx T6 screwdriver.

Step 5

• Run a plastic opening tool along the edge of the back casing while prying it apart to remove it.

Run a plastic opening tool along the edge of the back casing while prying it apart to remove it.

Step 6

• Turn the phone over and open the memory stick compartment.
• Stick a plastic opening tools into the opening and twist it to gain some leverage. This should begin separating the front casing from the interior plastic support frame.

Turn the phone over and open the memory stick compartment.

Stick a plastic opening tools into the opening and twist it to gain some leverage. This should begin separating the front casing from the interior plastic support frame.

Step 7

• Run the plastic opening tool upwards along that side, removing the housing.

Run the plastic opening tool upwards along that side, removing the housing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Lucy Bowen                     

Member since: 09/01/2011

407 Reputation

                                      7 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges                           

Team

                       Cuesta, Team 1-7, Zipperian Fall 2011                        

                                                  Member of Cuesta, Team 1-7, Zipperian Fall 2011 



                    CUESTA-ZIPPERIAN-F11S1G7                     


                                            1 Member                     


                                            14 Guides authored