Difficulty
Moderate
Steps
8
Time Required
10 - 15 minutes
Sections
2
- Battery
- 2 steps
- Speaker
- 6 steps
Flags
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Better Introduction
Improve this guide by completing or revising its introduction.
BackSony Ericsson W350a
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- Place the phone face down on a flat smooth surface so that the camera, logos, and speaker face up.
- Using the provided notch on the bottom of the back cover, insert a plastic opening tool and lift upwards to remove the back cover of the phone.
Place the phone face down on a flat smooth surface so that the camera, logos, and speaker face up.
Using the provided notch on the bottom of the back cover, insert a plastic opening tool and lift upwards to remove the back cover of the phone.
1024
Step 2
- Set the cover to the side upon removal.
- Insert the plastic opening tool into the crevice between the camera and the battery of the phone. Using a gentle prying motion, lift the end of the battery and remove.
- After removal, recycle the defective battery appropriately.
Set the cover to the side upon removal.
Insert the plastic opening tool into the crevice between the camera and the battery of the phone. Using a gentle prying motion, lift the end of the battery and remove.
After removal, recycle the defective battery appropriately.
Step 3
Speaker
- Flip the phone over and remove the Sony Ericsson sticker that is over the phone’s ear speaker.
- Using a T5 screwdriver, loosen and remove the two screws under the Sony Ericsson sticker by turning them counterclockwise.
Flip the phone over and remove the Sony Ericsson sticker that is over the phone’s ear speaker.
Using a T5 screwdriver, loosen and remove the two screws under the Sony Ericsson sticker by turning them counterclockwise.
Step 4
- Using a mini Phillips screwdriver, remove two screws by turning them counterclockwise.
Using a mini Phillips screwdriver, remove two screws by turning them counterclockwise.
Step 5
- Insert an opening tool in the bottom crack between the front and back plates and use a gentle upward pull to separate the back case from the front case.
- Side buttons/controls may fall from their place in between the back and front casings.
Insert an opening tool in the bottom crack between the front and back plates and use a gentle upward pull to separate the back case from the front case.
Side buttons/controls may fall from their place in between the back and front casings.
Step 6
- Using a T5 screwdriver, remove the two screws by turning them counterclockwise.
Using a T5 screwdriver, remove the two screws by turning them counterclockwise.
Step 7
- Using an opening tool and a gentle outward motion, separate the front plate from the inner phone workings.
Using an opening tool and a gentle outward motion, separate the front plate from the inner phone workings.
Step 8
- Using a Phillips head screwdriver, remove the screw from the front number pad by turning it counterclockwise.
- Remove the speaker from the phone.
Using a Phillips head screwdriver, remove the screw from the front number pad by turning it counterclockwise.
Remove the speaker from the phone.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 7 other contributors
Ldellos
Member since: 03/12/2012
112 Reputation
3 Guides authored
Badges:
7
+4 more badges
Team
Clemson, Team 1-4, Benson Spring 2012
Member of Clemson, Team 1-4, Benson Spring 2012
CLEM-BENSON-S12S1G4
4 Members
14 Guides authored