Sony Ericsson W350A Keypad Replacement Repair Guide

Difficulty

Moderate

Steps

11

Time Required

                          15 - 20 minutes            

Sections

4

• Flip Cover
• 2 steps
• Battery
• 2 steps
• Speaker
• 6 steps
• Keypad
• 1 step

Flags

2

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Better Introduction

Improve this guide by completing or revising its introduction.

• BackSony Ericsson W350a

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Flip Cover               

• Place the plastic opening tool in the bottom corner of the phone in the crevice between the flap to remove the cover.

Place the plastic opening tool in the bottom corner of the phone in the crevice between the flap to remove the cover.

1024

Step 2

• Remove the cover with a slight twisting motion.

Remove the cover with a slight twisting motion.

Step 3

              Battery               

• Place the phone face down on a flat smooth surface so that the camera, logos, and speaker face up.
• Using the provided notch on the bottom of the back cover, insert a plastic opening tool and lift upwards to remove the back cover of the phone.

Place the phone face down on a flat smooth surface so that the camera, logos, and speaker face up.

Using the provided notch on the bottom of the back cover, insert a plastic opening tool and lift upwards to remove the back cover of the phone.

Step 4

• Set the cover to the side upon removal.
• Insert the plastic opening tool into the crevice between the camera and the battery of the phone. Using a gentle prying motion, lift the end of the battery and remove.
• After removal, recycle the defective battery appropriately.

Set the cover to the side upon removal.

Insert the plastic opening tool into the crevice between the camera and the battery of the phone. Using a gentle prying motion, lift the end of the battery and remove.

After removal, recycle the defective battery appropriately.

Step 5

              Speaker               

• Flip the phone over and remove the Sony Ericsson sticker that is over the phone’s ear speaker.
• Using a T5 screwdriver, loosen and remove the two screws under the Sony Ericsson sticker by turning them counterclockwise.

Flip the phone over and remove the Sony Ericsson sticker that is over the phone’s ear speaker.

Using a T5 screwdriver, loosen and remove the two screws under the Sony Ericsson sticker by turning them counterclockwise.

Step 6

• Using a mini Phillips screwdriver, remove two screws by turning them counterclockwise.

Using a mini Phillips screwdriver, remove two screws by turning them counterclockwise.

Step 7

• Insert an opening tool in the bottom crack between the front and back plates and use a gentle upward pull to separate the back case from the front case.
• Side buttons/controls may fall from their place in between the back and front casings.

Insert an opening tool in the bottom crack between the front and back plates and use a gentle upward pull to separate the back case from the front case.

Side buttons/controls may fall from their place in between the back and front casings.

Step 8

• Using a T5 screwdriver, remove the two screws by turning them counterclockwise.

Using a T5 screwdriver, remove the two screws by turning them counterclockwise.

Step 9

• Using an opening tool and a gentle outward motion, separate the front plate from the inner phone workings.

Using an opening tool and a gentle outward motion, separate the front plate from the inner phone workings.

Step 10

• Using a Phillips head screwdriver, remove the screw from the front number pad by turning it counterclockwise.
• Remove the speaker from the phone.

Using a Phillips head screwdriver, remove the screw from the front number pad by turning it counterclockwise.

Remove the speaker from the phone.

Step 11

              Keypad               

• Disconnect the ribbon cable from its connection until the keypad “pops” off.
• Remove the keypad from the phone.

Disconnect the ribbon cable from its connection until the keypad “pops” off.

Remove the keypad from the phone.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 6 other contributors 

                    Ldellos                     

Member since: 03/12/2012

112 Reputation

                                      3 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Clemson, Team 1-4, Benson Spring 2012                        

                                                  Member of Clemson, Team 1-4, Benson Spring 2012 



                    CLEM-BENSON-S12S1G4                     


                                            4 Members                     


                                            14 Guides authored