Difficulty

Moderate

Steps

7

Time Required

                          10 - 15 minutes

Sections

5

  • Disassembling Sony Ericsson W200i Battery
  • 2 steps
  • Front Case
  • 1 step
  • Core
  • 2 steps
  • Back Case
  • 1 step
  • Speaker
  • 1 step

Flags

0

  • BackSony Ericsson W200i

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Disassembling Sony Ericsson W200i Battery
  • Slide the battery cover up and off the phone.

Slide the battery cover up and off the phone.

1024

Step 2

  • Pop the battery out of its slot by lifting it up.

Pop the battery out of its slot by lifting it up.

Step 3

              Front Case
  • Insert the plastic opening tool in between the front case and the back case.
  • Apply downward pressure to make the case lift upwards, thus popping the front case off.
  • Use caution when removing the front case. It may seem stuck but just ease it out.

Insert the plastic opening tool in between the front case and the back case.

Apply downward pressure to make the case lift upwards, thus popping the front case off.

Use caution when removing the front case. It may seem stuck but just ease it out.

Step 4

              Core
  • Remove the 4 screws in the corners of the front of the phone using a T6 screwdriver.
  • Note that the top 2 screws are silver and the bottom 2 screws are black.

Remove the 4 screws in the corners of the front of the phone using a T6 screwdriver.

Note that the top 2 screws are silver and the bottom 2 screws are black.

Step 5

  • There is a black tab in the top left corner holding the core in place.
  • Remove the core by pulling straight up to prevent breaking the tab.

There is a black tab in the top left corner holding the core in place.

Remove the core by pulling straight up to prevent breaking the tab.

Step 6

              Back Case
  • Pull back on the indicated tab of the white plastic cover to unhook it from the top of the phone.
  • Using the plastic opening tool, undo the indicated clip on the bottom of the white plastic cover.
  • Remove the white plastic cover.

Pull back on the indicated tab of the white plastic cover to unhook it from the top of the phone.

Using the plastic opening tool, undo the indicated clip on the bottom of the white plastic cover.

Remove the white plastic cover.

Step 7

              Speaker
  • Remove the speaker by pulling it up and out of place with the tweezers.

Remove the speaker by pulling it up and out of place with the tweezers.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Andy Whitmyre

Member since: 01/12/2011

141 Reputation

                                      1 Guide authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Cal Poly, Team 14-10, Forte Winter 2011                        

                                                  Member of Cal Poly, Team 14-10, Forte Winter 2011 



                    CPSU-FORTE-W11S14G10                     


                                            5 Members                     


                                            16 Guides authored