Difficulty

Difficult

Steps

8

Time Required

                          20 - 25 minutes            

Sections

4

  • Disassembling Sony Ericsson W200i Battery
  • 2 steps
  • Front Case
  • 1 step
  • Core
  • 2 steps
  • LCD Screen
  • 3 steps

Flags

0

  • BackSony Ericsson W200i

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Disassembling Sony Ericsson W200i Battery               
  • Slide the battery cover up and off the phone.

Slide the battery cover up and off the phone.

1024

Step 2

  • Pop the battery out of its slot by lifting it up.

Pop the battery out of its slot by lifting it up.

Step 3

              Front Case               
  • Insert the plastic opening tool in between the front case and the back case.
  • Apply downward pressure to make the case lift upwards, thus popping the front case off.
  • Use caution when removing the front case. It may seem stuck but just ease it out.

Insert the plastic opening tool in between the front case and the back case.

Apply downward pressure to make the case lift upwards, thus popping the front case off.

Use caution when removing the front case. It may seem stuck but just ease it out.

Step 4

              Core               
  • Remove the 4 screws in the corners of the front of the phone using a T6 screwdriver.
  • Note that the top 2 screws are silver and the bottom 2 screws are black.

Remove the 4 screws in the corners of the front of the phone using a T6 screwdriver.

Note that the top 2 screws are silver and the bottom 2 screws are black.

Step 5

  • There is a black tab in the top left corner holding the core in place.
  • Remove the core by pulling straight up to prevent breaking the tab.

There is a black tab in the top left corner holding the core in place.

Remove the core by pulling straight up to prevent breaking the tab.

Step 6

              LCD Screen               
  • Undo the metal clip on each side of the core using the plastic opening tool.
  • Do not bend clips past 2mm or they could break.

Undo the metal clip on each side of the core using the plastic opening tool.

Do not bend clips past 2mm or they could break.

Step 7

  • Gently pull the white keyboard and charging port away from the motherboard and off the phone.

Gently pull the white keyboard and charging port away from the motherboard and off the phone.

Step 8

  • Undo the grey clip that holds the LCD ribbon in place by loosening one side of the clip with the plastic opening tool, then gently separate the other side of the clip from the holder.
  • The copper end of the ribbon should slide out of the housing as you pull the LCD up and away from the motherboard.
  • Using too much force may bend the copper ribbon.

Undo the grey clip that holds the LCD ribbon in place by loosening one side of the clip with the plastic opening tool, then gently separate the other side of the clip from the holder.

The copper end of the ribbon should slide out of the housing as you pull the LCD up and away from the motherboard.

Using too much force may bend the copper ribbon.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 6 other contributors 

                    Austin Cade                     

Member since: 01/11/2011

192 Reputation

                                      1 Guide authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Cal Poly, Team 14-10, Forte Winter 2011                        

                                                  Member of Cal Poly, Team 14-10, Forte Winter 2011 



                    CPSU-FORTE-W11S14G10                     


                                            5 Members                     


                                            16 Guides authored