Difficulty
Moderate
Steps
6
Time Required
10 - 15 minutes
Sections
3
- Battery Cover
- 1 step
- Back Case
- 4 steps
- Sim Card
- 1 step
Flags
1
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackSony Ericsson TM506
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery Cover
- Firmly hold the phone between your fingers with your thumb on the battery cover.
- Push down with your thumb until the battery cover comes off.
Firmly hold the phone between your fingers with your thumb on the battery cover.
Push down with your thumb until the battery cover comes off.
1024
Step 2
Back Case
- Unscrew the bottom two 5.4mm screws with a Torx T6 screwdriver.
Unscrew the bottom two 5.4mm screws with a Torx T6 screwdriver.
Step 3
- Remove the two rubber casings for the top two screws with a plastic opening tool.
Remove the two rubber casings for the top two screws with a plastic opening tool.
Step 4
- Unscrew these two 5.4mm screws with a Torx T6 screwdriver.
Unscrew these two 5.4mm screws with a Torx T6 screwdriver.
Step 5
- There are eight snap hooks located around the outer case. Carefully snap these to remove the outer case.
There are eight snap hooks located around the outer case. Carefully snap these to remove the outer case.
Step 6
Sim Card
- The Sim card can simply be pulled out through the opening.
The Sim card can simply be pulled out through the opening.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Daniel
Member since: 06/20/2012
83 Reputation
7 Guides authored
Badges:
12
+9 more badges
Team
Cal Poly, Team 1-1, Regan SU 2012
Member of Cal Poly, Team 1-1, Regan SU 2012
CPSU-REGAN-SU12S1G1
2 Members
16 Guides authored