Sony Ericsson T68I Vibration Motor Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

2

• Keypad
• 4 steps
• Vibration Motor
• 1 step

Flags

0

• BackSony Ericsson T68i

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Keypad               

• Remove the battery from the back.

Remove the battery from the back.

1024

Step 2

• Pry off the plastic cover from the top with a thin plastic shim, then remove it from the two bottom clips.
• Do not bend it too far down, or else you risk breaking the two bottom clips.

Pry off the plastic cover from the top with a thin plastic shim, then remove it from the two bottom clips.

Do not bend it too far down, or else you risk breaking the two bottom clips.

Step 3

• Unscrew all four Torx T6 screws.
• Keep in a safe place.

Unscrew all four Torx T6 screws.

Keep in a safe place.

Step 4

• After removing the screws, the two halves will separate. If not, then pry them gently apart.

After removing the screws, the two halves will separate. If not, then pry them gently apart.

Step 5

              Vibration Motor               

• Remove the vibration motor visible in the front housing.

Remove the vibration motor visible in the front housing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 4 other contributors 

                    Tim Dascomb                     

Member since: 04/13/2010

159 Reputation

                                      7 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       Cal Poly, Team 26-34, Regan Spring 2010                        

                                                  Member of Cal Poly, Team 26-34, Regan Spring 2010 



                    CPSU-REGAN-S10S26G34                     


                                            4 Members                     


                                            13 Guides authored