Difficulty

Moderate

Steps

7

Time Required

Suggest a time??

Sections

2

  • Keypad
  • 4 steps
  • Microphone
  • 3 steps

Flags

1

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

  • BackSony Ericsson T68i

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Keypad
  • Remove the battery from the back.

Remove the battery from the back.

1024

Step 2

  • Pry off the plastic cover from the top with a thin plastic shim, then remove it from the two bottom clips.
  • Do not bend it too far down, or else you risk breaking the two bottom clips.

Pry off the plastic cover from the top with a thin plastic shim, then remove it from the two bottom clips.

Do not bend it too far down, or else you risk breaking the two bottom clips.

Step 3

  • Unscrew all four Torx T6 screws.
  • Keep in a safe place.

Unscrew all four Torx T6 screws.

Keep in a safe place.

Step 4

  • After removing the screws, the two halves will separate. If not, then pry them gently apart.

After removing the screws, the two halves will separate. If not, then pry them gently apart.

Step 5

              Microphone
  • Next remove the circuit board and screen from the device.
  • Use your T6 to remove the 4 screws holding the cover on.

Next remove the circuit board and screen from the device.

Use your T6 to remove the 4 screws holding the cover on.

Step 6

  • The board and screen should just pop out at this point.

The board and screen should just pop out at this point.

Step 7

  • The microphone at the bottom of the rear housing can be levered out using a small screwdriver or any similar tool.

The microphone at the bottom of the rear housing can be levered out using a small screwdriver or any similar tool.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Tim Dascomb

Member since: 04/13/2010

159 Reputation

                                      7 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Cal Poly, Team 26-34, Regan Spring 2010                        

                                                  Member of Cal Poly, Team 26-34, Regan Spring 2010 



                    CPSU-REGAN-S10S26G34                     


                                            4 Members                     


                                            13 Guides authored