Difficulty
Easy
Steps
4
Time Required
Suggest a time??
Sections
1
- Keypad
- 4 steps
Flags
Missing Prerequisites
This guide is missing information on how to start the process. Make a prerequisite guide!
BackSony Ericsson T68i
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Keypad
- Remove the battery from the back.
Remove the battery from the back.
1024
Step 2
- Pry off the plastic cover from the top with a thin plastic shim, then remove it from the two bottom clips.
- Do not bend it too far down, or else you risk breaking the two bottom clips.
Pry off the plastic cover from the top with a thin plastic shim, then remove it from the two bottom clips.
Do not bend it too far down, or else you risk breaking the two bottom clips.
Step 3
- Unscrew all four Torx T6 screws.
- Keep in a safe place.
Unscrew all four Torx T6 screws.
Keep in a safe place.
Step 4
- After removing the screws, the two halves will separate. If not, then pry them gently apart.
After removing the screws, the two halves will separate. If not, then pry them gently apart.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Tim Dascomb
Member since: 04/13/2010
159 Reputation
7 Guides authored
Badges:
12
+9 more badges
Team
Cal Poly, Team 26-34, Regan Spring 2010
Member of Cal Poly, Team 26-34, Regan Spring 2010
CPSU-REGAN-S10S26G34
4 Members
13 Guides authored