Sony Ecm Ms907 Microphone Disassembly Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          5 minutes            

Sections

1

• Sony ECM-MS907 Microphone Disassembly
• 6 steps

Flags

2

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

Step Trimmer

This guide has unnecessary steps. Trim them to be more concise!

• BackSony ECM-MS907 Microphone

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

For names of the microphone parts, please click below:

Microphone Parts’ Manual

What you need

Step 1

              Sony ECM-MS907 Microphone Disassembly               

• Remove the windscreen. Using the Phillips head (#00) screwdriver, unscrew the diaphragm from the bottom base of the microphone.

Remove the windscreen. Using the Phillips head (#00) screwdriver, unscrew the diaphragm from the bottom base of the microphone.

1024

Step 2

• Separate the microphone into two pieces to reveal the internal shield cover.

Separate the microphone into two pieces to reveal the internal shield cover.

Step 3

• By unscrewing in a clockwise motion remove the bottom base of the microphone.
• This should free up the bottom base so that it can be separated from the microphone.

By unscrewing in a clockwise motion remove the bottom base of the microphone.

This should free up the bottom base so that it can be separated from the microphone.

Step 4

• Using the Phillips head (#2) screwdriver, remove screw directly above the battery by rotating counterclockwise.

Using the Phillips head (#2) screwdriver, remove screw directly above the battery by rotating counterclockwise.

Step 5

• Using the Phillips head (#0) screwdriver to remove the black screw near the bottom of the microphone.

Using the Phillips head (#0) screwdriver to remove the black screw near the bottom of the microphone.

Step 6

• Use the heavy duty spudger to detach the grip area from the microphone. The inside of the diaphragm should now be visible.

Use the heavy duty spudger to detach the grip area from the microphone. The inside of the diaphragm should now be visible.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Attached Documents

• Microphone-Parts-Mnual.pdf
• PDF - 1.99 mb
• View

Microphone-Parts-Mnual.pdf

PDF - 1.99 mb

Author

                                      with 7 other contributors 

                    Kefaya                     

Member since: 01/23/2014

364 Reputation

                                      3 Guides authored                  



                       Badges:
                       9





                                                        +6 more badges                           

Team

                       New Mexico State, Team 1-2, Sheppard Spring 2014                        

                                                  Member of New Mexico State, Team 1-2, Sheppard Spring 2014 



                    NMSU-SHEPPARD-S14S1G2                     


                                            3 Members                     


                                            6 Guides authored