Difficulty

Moderate

Steps

13

Time Required

                          15 minutes

Sections

2

  • Monitor
  • 6 steps
  • Screen
  • 7 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackSony DVP-FX730

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Monitor
  • Use your hand to remove the small back cover by gently pulling upward.

Use your hand to remove the small back cover by gently pulling upward.

1024

Step 2

  • Using a screwdriver, remove the two 12 mm pan head screws.

Using a screwdriver, remove the two 12 mm pan head screws.

Step 3

  • The screen should now detach from the primary device.
  • The wires, indicated with a blue box, will still connect the screen.

The screen should now detach from the primary device.

The wires, indicated with a blue box, will still connect the screen.

Step 4

  • Remove the wires attached to the white base using tweezers to pull them up.

Remove the wires attached to the white base using tweezers to pull them up.

Step 5

  • Referring back to Step 8, do the same with the wires attached to the black base.

Referring back to Step 8, do the same with the wires attached to the black base.

Step 6

  • The screen should now be completely separated from the main device.

The screen should now be completely separated from the main device.

Step 7

              Screen
  • Remove the four rubber feet and the screws beneath.
  • Remove the two exposed screws on the left side.
  • Pull back the cables until the screw is visible.

Remove the four rubber feet and the screws beneath.

Remove the two exposed screws on the left side.

Pull back the cables until the screw is visible.

Step 8

  • Using the spudger, separate the top and bottom covers.

Using the spudger, separate the top and bottom covers.

Step 9

  • Identify the gray back of the screen.

Identify the gray back of the screen.

Step 10

  • Remove the screws.

Remove the screws.

Step 11

  • Remove the metal plates.

Remove the metal plates.

Step 12

  • Using spudger, push the lock clips to unlock the ribbon cable.
  • Using tweezers, pull the connector loose.

Using spudger, push the lock clips to unlock the ribbon cable.

Using tweezers, pull the connector loose.

Step 13

  • Place your hand on the front of the screen and push upwards.

Place your hand on the front of the screen and push upwards.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 7 other contributors 


                    Oliver Woolsoncroft

Member since: 01/20/2012

75 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Cal Poly, Team 11-21, Maness Winter 2012                        

                                                  Member of Cal Poly, Team 11-21, Maness Winter 2012 



                    CPSU-MANESS-W12S11G21                     


                                            4 Members                     


                                            5 Guides authored