Difficulty
Moderate
Steps
4
Time Required
10 minutes
Sections
1
- Screen
- 4 steps
Flags
2
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackSony Dream Machine ICF-C717PJ
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Screen
- Using a Phillips #0 screwdriver unscrew the three screws that connect the back panel to the device.
Using a Phillips #0 screwdriver unscrew the three screws that connect the back panel to the device.
1024
Step 2
- Using a thin flat tool, pry off the panel on the back of the device.
Using a thin flat tool, pry off the panel on the back of the device.
Step 3
- Unscrew the two screws connecting the motor board to the device.
- Gently remove the motherboard from the device to gain access to the screen.
Unscrew the two screws connecting the motor board to the device.
Gently remove the motherboard from the device to gain access to the screen.
Step 4
- Flip the device around so that the display is facing you. Gently push the display towards the inside of the device.
- Disconnect the display cable from the motherboard and reconnect the display cable for the new display.
- After connecting the new display push it firmly in place so that the display panel is properly aligned with the cutout for the display. When correctly locked in place the display panel should not move around.
Flip the device around so that the display is facing you. Gently push the display towards the inside of the device.
Disconnect the display cable from the motherboard and reconnect the display cable for the new display.
After connecting the new display push it firmly in place so that the display panel is properly aligned with the cutout for the display. When correctly locked in place the display panel should not move around.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 6 other contributors
Gurleen Powar
Member since: 08/11/2018
376 Reputation
3 Guides authored
Badges:
5
+2 more badges
Team
UW Tacoma, Team S1-G3, Liner Summer 2018
Member of UW Tacoma, Team S1-G3, Liner Summer 2018
UWT-LINER-SU18S1G3
4 Members
5 Guides authored