Sony Dcr Dvd 108 Motherboard Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

Suggest a time??

Sections

2

• Sony DCR-DVD 108 Case Disassembly
• 5 steps
• Motherboard
• 3 steps

Flags

0

• BackSony DCR-DVD 108

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Sony DCR-DVD 108 Case Disassembly               

• Remove all the 4.3mm screws on the bottom using a J000 Phillips screwdriver. There should be seven screws (4 silver, 2 black).

Remove all the 4.3mm screws on the bottom using a J000 Phillips screwdriver. There should be seven screws (4 silver, 2 black).

1024

Step 2

• Remove the 5mm #0 Phillips screws on the underside of the LCD tuck-a-way.

Remove the 5mm #0 Phillips screws on the underside of the LCD tuck-a-way.

Step 3

• Remove the 2mm #0 Phillips screw behind the battery.

Remove the 2mm #0 Phillips screw behind the battery.

Step 4

• Open the dvd cover and remove the 3 4.3mm phillips screws. Including ones in the corners that may be hidden.

Open the dvd cover and remove the 3 4.3mm phillips screws. Including ones in the corners that may be hidden.

Step 5

• Once all the screws are removed you can safely pry open the camera case using a spudger.

Once all the screws are removed you can safely pry open the camera case using a spudger.

Step 6

              Motherboard               

• Remove all ribbon connectors from the motherboard using tweezers. Simply grab each ribbon cable and pull straight out of the connector.
• Be careful not to bend the ribbon cables.
• There is a hidden wire on the bottom of the board that should also be removed.

Remove all ribbon connectors from the motherboard using tweezers. Simply grab each ribbon cable and pull straight out of the connector.

Be careful not to bend the ribbon cables.

There is a hidden wire on the bottom of the board that should also be removed.

Step 7

• Remove 3 brown copper screws. Each copper screw has a #0 Phillips head and is 2.8mm in length.

Remove 3 brown copper screws. Each copper screw has a #0 Phillips head and is 2.8mm in length.

Step 8

• Lift the motherboard up from the outside edges to remove.

Lift the motherboard up from the outside edges to remove.

In order to reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 4 other contributors 

                    Elijah DeWolf                     

Member since: 02/09/2016

577 Reputation

                                      5 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       USF Tampa, Team 7-6, Cheng Spring 2016                        

                                                  Member of USF Tampa, Team 7-6, Cheng Spring 2016 



                    USFT-CHENG-S16S7G6                     


                                            3 Members                     


                                            10 Guides authored