Difficulty
Moderate
Steps
7
Time Required
Suggest a time??
Sections
1
- DVD Laser
- 7 steps
Flags
0
BackSony DCR-DVD 108
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
DVD Laser
- Open the DVD reader and remove the 4.3mm Phillips screw.
Open the DVD reader and remove the 4.3mm Phillips screw.
1024
Step 2
- Remove black shield with a plastic spudger.
Remove black shield with a plastic spudger.
Step 3
- Remove the two 2.8mm Phillips screws pictured.
Remove the two 2.8mm Phillips screws pictured.
Step 4
- Next remove the underlying silver colored shield with a plastic spudger.
Next remove the underlying silver colored shield with a plastic spudger.
Step 5
- With tweezers, gently remove the DVD laser, and expose solder leads.
With tweezers, gently remove the DVD laser, and expose solder leads.
Step 6
- With a solder iron, remove solder leads.
- If you need assistance with soldering this guide may help:How To Solder and Desolder Connections
With a solder iron, remove solder leads.
If you need assistance with soldering this guide may help:How To Solder and Desolder Connections
Step 7
- Once solder leads are removed, and solder iron has been safely put away, you my know handle and replace DVD laser. Full replacement follows the steps provided in reverse.
Once solder leads are removed, and solder iron has been safely put away, you my know handle and replace DVD laser. Full replacement follows the steps provided in reverse.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Elijah DeWolf
Member since: 02/09/2016
577 Reputation
5 Guides authored
Badges:
13
+10 more badges
Team
USF Tampa, Team 7-6, Cheng Spring 2016
Member of USF Tampa, Team 7-6, Cheng Spring 2016
USFT-CHENG-S16S7G6
3 Members
10 Guides authored