Difficulty

Moderate

Steps

9

Time Required

                          15 minutes

Sections

3

  • Battery
  • 2 steps
  • Outer Case
  • 2 steps
  • Lens Assembly
  • 5 steps

Flags

0

  • BackSony Cyber-shot DSC-WX220

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Slide the gray switch from lock to open position.

Slide the gray switch from lock to open position.

1024

Step 2

  • Pull down on the blue tab to release the battery.

Pull down on the blue tab to release the battery.

Step 3

              Outer Case
  • Use a PH00 screwdriver to remove the five 3.5 mm screws.
  • Use a PH00 screwdriver to remove the two 2.5 mm screws.

Use a PH00 screwdriver to remove the five 3.5 mm screws.

Use a PH00 screwdriver to remove the two 2.5 mm screws.

Step 4

  • Pry apart the case gently using a plastic opening tool.

Pry apart the case gently using a plastic opening tool.

Step 5

              Lens Assembly
  • Pry back the panel to the right of the screen using a plastic opening tool.

Pry back the panel to the right of the screen using a plastic opening tool.

Step 6

  • Working on the left side of the screen, pry the metal panel off from the motherboard housing using a plastic opening tool.

Working on the left side of the screen, pry the metal panel off from the motherboard housing using a plastic opening tool.

Step 7

  • Pull out the ZIF cable from the motherboard.
  • When removing the ZIF cable, pull it straight out to avoid damaging the cable.

Pull out the ZIF cable from the motherboard.

When removing the ZIF cable, pull it straight out to avoid damaging the cable.

Step 8

  • Unpin the ZIF cable by lifting the cable towards the top of the camera while pulling up towards yourself.
  • Pull the ZIF cable out.

Unpin the ZIF cable by lifting the cable towards the top of the camera while pulling up towards yourself.

Pull the ZIF cable out.

Step 9

  • Lift the lens out of the case.
  • Pull out the ZIF cable.

Lift the lens out of the case.

Pull out the ZIF cable.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Kate Glazer

Member since: 03/20/2018

609 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       IUPUI, Team S6-G3, Baechle Spring 2018                        

                                                  Member of IUPUI, Team S6-G3, Baechle Spring 2018 



                    IUPUI-BAECHLE-S18S6G3                     


                                            3 Members                     


                                            5 Guides authored