Difficulty
Moderate
Steps
10
Time Required
15 minutes
Sections
3
- Battery
- 2 steps
- Outer Case
- 2 steps
- Flash Assembly
- 6 steps
Flags
0
BackSony Cyber-shot DSC-WX220
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Slide the gray switch from lock to open position.
Slide the gray switch from lock to open position.
1024
Step 2
- Pull down on the blue tab to release the battery.
Pull down on the blue tab to release the battery.
Step 3
Outer Case
- Use a PH00 screwdriver to remove the five 3.5 mm screws.
- Use a PH00 screwdriver to remove the two 2.5 mm screws.
Use a PH00 screwdriver to remove the five 3.5 mm screws.
Use a PH00 screwdriver to remove the two 2.5 mm screws.
Step 4
- Pry apart the case gently using a plastic opening tool.
Pry apart the case gently using a plastic opening tool.
Step 5
Flash Assembly
- Pry back the panel to the right of the screen using a plastic opening tool.
Pry back the panel to the right of the screen using a plastic opening tool.
Step 6
- Working on the left side of the screen, pry the metal panel off from the motherboard housing using a plastic opening tool.
Working on the left side of the screen, pry the metal panel off from the motherboard housing using a plastic opening tool.
Step 7
- Pull out the ZIF cable from the motherboard.
- When removing the ZF cable, pull it straight out to avoid damaging the cable.
Pull out the ZIF cable from the motherboard.
When removing the ZF cable, pull it straight out to avoid damaging the cable.
Step 8
- Pull the capacitor out of the shell.
- Be careful not to shock yourself on the capacitor(metal components on the top)
Pull the capacitor out of the shell.
Be careful not to shock yourself on the capacitor(metal components on the top)
Step 9
- Unpin the flash assembly.
Unpin the flash assembly.
Step 10
- Lift flash component toward you and gently pull the ZIF cable up and away from the camera.
Lift flash component toward you and gently pull the ZIF cable up and away from the camera.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Kate Glazer
Member since: 03/20/2018
609 Reputation
5 Guides authored
Badges:
9
+6 more badges
Team
IUPUI, Team S6-G3, Baechle Spring 2018
Member of IUPUI, Team S6-G3, Baechle Spring 2018
IUPUI-BAECHLE-S18S6G3
3 Members
5 Guides authored
