Difficulty

Easy

Steps

5

Time Required

                          5 minutes

Sections

2

  • Battery
  • 2 steps
  • Outer Casing
  • 3 steps

Flags

0

  • BackSony Cyber-shot DSC-WX100

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Open the flap indicated to allow access to the battery slot.
  • The gray switch indicated has to be moved to the right in order to release the flap.

Open the flap indicated to allow access to the battery slot.

The gray switch indicated has to be moved to the right in order to release the flap.

1024

Step 2

  • If the old battery is still in the slot, then make sure the camera is turned off prior to removal.
  • If there is a battery currently in the slot, remove by first pulling downwards on the blue component. This will allow you to remove the battery from the slot.

If the old battery is still in the slot, then make sure the camera is turned off prior to removal.

If there is a battery currently in the slot, remove by first pulling downwards on the blue component. This will allow you to remove the battery from the slot.

Step 3

              Outer Casing
  • Remove all of the 1mm screws using a Philips #000 Screwdriver.
  • Remover the rest of the screws (2mm) from the camera covers using a Phillips #000 Screwdriver.

Remove all of the 1mm screws using a Philips #000 Screwdriver.

Remover the rest of the screws (2mm) from the camera covers using a Phillips #000 Screwdriver.

Step 4

  • Use the plastic opening tool to gently remove the front and back plates of the camera.

Use the plastic opening tool to gently remove the front and back plates of the camera.

Step 5

  • Use a plastic opening tool to gently release the two indicated tabs.

Use a plastic opening tool to gently release the two indicated tabs.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 1 other contributor 


                    Matthew

Member since: 03/18/2015

583 Reputation

                                      4 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Michigan Tech, Team 1-9, Lauer Spring 2015                        

                                                  Member of Michigan Tech, Team 1-9, Lauer Spring 2015 



                    MTU-LAUER-S15S1G9                     


                                            2 Members                     


                                            6 Guides authored