Difficulty
Easy
Steps
3
Time Required
10 - 15 minutes
Sections
1
- Button Board
- 3 steps
Flags
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackSony Cyber-shot DSC-W800
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
- The Button Board is an integral part of the device and any improper handling can cause issues in other parts of the camera.Be cautious when removing ribbon wires.Be sure to keep track of all pieces that are taken apart.
What you need
Step 1
Button Board
- Remove the five 4.0 mm Phillips #000 screws on the back panel.
Remove the five 4.0 mm Phillips #000 screws on the back panel.
1024
Step 2
- Using the Spudger, remove the back panel from the device.
- The loose piece circled in the picture will most likely fall off the camera housing.
Using the Spudger, remove the back panel from the device.
The loose piece circled in the picture will most likely fall off the camera housing.
Step 3
- Remove the two 2.15mm Phillips #000 screws from the circuit board.
- Gently pull on the ribbon wire from ZIF connector with the tweezers to remove the button board.
- Ribbon wires can easily be damaged.
Remove the two 2.15mm Phillips #000 screws from the circuit board.
Gently pull on the ribbon wire from ZIF connector with the tweezers to remove the button board.
Ribbon wires can easily be damaged.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 4 other contributors
Thomas Campo
Member since: 02/09/2016
764 Reputation
4 Guides authored
Badges:
16
+13 more badges
Team
USF Tampa, Team 17-5, Blackwell Winter 2016
Member of USF Tampa, Team 17-5, Blackwell Winter 2016
USFT-BLACKWELL-W16S17G5
5 Members
5 Guides authored
jimbradshaw - Jan 23, 2017
Reply
Thanks for this - was spot on and allowed me to easily fix the problem I was experiencing!
Trisha Amable Girlfridayz - Mar 8, 2019
Reply
follow the step camera button loosen a bit unstuck but camera still stock on language setting and do not budge
follow the step the button are unstuck but the camera display still stock on language setting
Naveed Shoukat - Apr 30, 2020
Reply
i need a new strip, because old strip was damaged.