Difficulty
Moderate
Steps
9
Time Required
Suggest a time??
Sections
2
- Case Cover
- 5 steps
- LCD Screen
- 4 steps
Flags
1
Missing Prerequisites
This guide is missing information on how to start the process. Make a prerequisite guide!
BackSony Cyber-shot DSC-W570
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Case Cover
- Remove the two Phillips head, 2.93 mm long screws at the bottom of the camera.
- Make sure the battery compartment door is in lock position.
Remove the two Phillips head, 2.93 mm long screws at the bottom of the camera.
Make sure the battery compartment door is in lock position.
1024
Step 2
- Turn the camera sideways so the left side is fasning upwards, remove the two Phillips head, 2.93 mm screws.
Turn the camera sideways so the left side is fasning upwards, remove the two Phillips head, 2.93 mm screws.
Step 3
- Now turn the device so the opposite side is fasning upwards and remove the last two Phillips head, 2.93 mm screws.
Now turn the device so the opposite side is fasning upwards and remove the last two Phillips head, 2.93 mm screws.
Step 4
- To remove the front cover, use a plastic opening tool gently pry the top cover.
- Then gently lift the cover off.
To remove the front cover, use a plastic opening tool gently pry the top cover.
Then gently lift the cover off.
Step 5
- To remove the back case cover from the body.
- First use a plastic opening tool gently pry along the side of the camera.
- Then slowly and gently lift the cover off.
To remove the back case cover from the body.
First use a plastic opening tool gently pry along the side of the camera.
Then slowly and gently lift the cover off.
Step 6
LCD Screen
- These are the two cables connecting the LCD screen to the motherboard below the screen.
These are the two cables connecting the LCD screen to the motherboard below the screen.
Step 7
- Remove the LCD screen from the side opppsite the battery terminals. Watch for the two cords mentioned in the previous step. These will still be connected.The side will flip up as shown in the next step.
Remove the LCD screen from the side opppsite the battery terminals. Watch for the two cords mentioned in the previous step. These will still be connected.The side will flip up as shown in the next step.
Step 8
- Pull these two cords straight back to disconnect them from the respective housings. Caution: The housing do not need to be moved or adjusted in anyway. Do not pull the cords at an angle, it can destroy the cords and the housing. Pull Straight Back!
Pull these two cords straight back to disconnect them from the respective housings. Caution: The housing do not need to be moved or adjusted in anyway. Do not pull the cords at an angle, it can destroy the cords and the housing. Pull Straight Back!
Step 9
- This is what the camera should look like after 2 cords and the screen have been removed. The lens cord is being held to the side for a clearer view.
This is what the camera should look like after 2 cords and the screen have been removed. The lens cord is being held to the side for a clearer view.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Thomas Plummer
Member since: 01/21/2015
164 Reputation
1 Guide authored
Badges:
8
+5 more badges
Team
USF Tampa, Team 9-1, Brown Winter 2015
Member of USF Tampa, Team 9-1, Brown Winter 2015
USFT-BROWN-W15S9G1
5 Members
10 Guides authored
