Difficulty

Easy

Steps

8

Time Required

                          5 - 10 minutes

Sections

3

  • Battery
  • 2 steps
  • Back Case
  • 4 steps
  • Front Case
  • 2 steps

Flags

0

  • BackSony Cyber-shot DSC-W55

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Slide the battery cover in the direction the arrow points.
  • Pull the battery cover towards you.

Slide the battery cover in the direction the arrow points.

Pull the battery cover towards you.

1024

Step 2

  • Flick the blue switch for the battery to pop out.
  • Remove the battery from the camera.

Flick the blue switch for the battery to pop out.

Remove the battery from the camera.

Step 3

              Back Case
  • Using the Phillips #00 Screwdriver, remove the two screws from the caution panel.
  • Remove that panel.
  • Careful for falling pieces.

Using the Phillips #00 Screwdriver, remove the two screws from the caution panel.

Remove that panel.

Careful for falling pieces.

Step 4

  • Remove the screw with a Phillips #00 screwdriver from the right side of the camera (with ‘3x optical zoom’ engraved on the side panel).
  • Remove that panel.

Remove the screw with a Phillips #00 screwdriver from the right side of the camera (with ‘3x optical zoom’ engraved on the side panel).

Step 5

  • Remove the screw using the Phillips #00 screwdriver from the bottom of the camera, closest to the back cover.

Remove the screw using the Phillips #00 screwdriver from the bottom of the camera, closest to the back cover.

Step 6

  • Gently remove the back cover.
  • It may be a bit stiff, so use some force to remove it. Proceed with caution.

Gently remove the back cover.

It may be a bit stiff, so use some force to remove it. Proceed with caution.

Step 7

              Front Case
  • Remove the screw using a Phillips #00 screwdriver on the left side (where the “3x optical zoom” panel use to be).

Remove the screw using a Phillips #00 screwdriver on the left side (where the “3x optical zoom” panel use to be).

Step 8

  • Remove the small screw using a Phillips #00 screwdriver on the bottom of the camera attached to the front cover.
  • Gently remove the front cover.
  • Put a little force to pop off the case. Proceed with caution.

Remove the small screw using a Phillips #00 screwdriver on the bottom of the camera attached to the front cover.

Gently remove the front cover.

Put a little force to pop off the case. Proceed with caution.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 7 other contributors 


                    Andrew Carter

Member since: 10/11/2010

190 Reputation

                                      2 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Cal Poly, Team 9-20, Regan Fall 2010                        

                                                  Member of Cal Poly, Team 9-20, Regan Fall 2010 



                    CPSU-REGAN-F10S9G20                     


                                            5 Members                     


                                            18 Guides authored