Difficulty

Moderate

Steps

6

Time Required

                          5 - 10 minutes

Sections

1

  • LCD Screen
  • 6 steps

Flags

0

  • BackSony Cyber-shot DSC-W510

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              LCD Screen
  • Place the Sony Cyber-shot DSC-W510 on the magnetic project mat. This will help keep the small screws organized.

Place the Sony Cyber-shot DSC-W510 on the magnetic project mat. This will help keep the small screws organized.

1024

Step 2

              Unscrew
  • Using the Phillips #00 screwdriver, unscrew the outside screws from the frame of the camera.
  • There are five screws on the bottom of the camera and two on the side.
  • If the screws are stripped, visit the Removing a Stripped Screw Guide.

Using the Phillips #00 screwdriver, unscrew the outside screws from the frame of the camera.

There are five screws on the bottom of the camera and two on the side.

If the screws are stripped, visit the Removing a Stripped Screw Guide.

Step 3

  • Pry open the screen frame using a plastic opening tool.
  • It may be necessary to start by prying at one end of the screen and moving around the edge of the screen frame, until it pops out.

Pry open the screen frame using a plastic opening tool.

It may be necessary to start by prying at one end of the screen and moving around the edge of the screen frame, until it pops out.

Step 4

  • Using the screw driver, unscrew the one screw on the control panel board.

Using the screw driver, unscrew the one screw on the control panel board.

Step 5

  • Gently unplug the control panel from the motherboard outlet.

Gently unplug the control panel from the motherboard outlet.

Step 6

  • Using your hands, pry open the LCD screen from the metal board.
  • Gently unplug the LCD screen from the motherboard.

Using your hands, pry open the LCD screen from the metal board.

Gently unplug the LCD screen from the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 3 other contributors 


                    kyle

Member since: 02/05/2015

382 Reputation

                                      3 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges